TESLA Alarm

BMS-A109

BMS_a109_HW_BMB_Mute_Status_Mismatch

System
BMS
Battery Management System
Typ
Alarm
Kategorie
Batterie
Schweregrad
Alarm

Was bedeutet BMS-A109?

Tesla Alarm-Code im Batteriemanagementsystem-Modul (BMS). A BMB device has a MUTE status that does not align with the MUTE/UNMUTE command sent by the BMS MUTE is disabled for any device while balancing, or otherwise enabled for any device MUTE is enabled for all devices while balancing, or otherwise disabled for all devices Bleeding bricks that do not MUTE during balancing can impact SOC estimation

Originale Beschreibung

A BMB device has a MUTE status that does not align with the MUTE/UNMUTE command sent by the BMS MUTE is disabled for any device while balancing, or otherwise enabled for any device MUTE is enabled for all devices while balancing, or otherwise disabled for all devices Bleeding bricks that do not MUTE during balancing can impact SOC estimation

Schweregrad-Hinweise

BMS-A109 ist ein Alarm im Battery Management System-System. Es ist im Allgemeinen sicher, weiterzufahren, aber lassen Sie es beim nächsten geplanten Service überprüfen.

Weitere BMS-Codes

BMS_a001 BMS_a002 The Gateway packPerformanceDeviation config does not match t... BMS_a003 BMS was unable to read a pack birth date from the calibratio... BMS_a004 The pack hot seal test has not completed in the lifetime of ... BMS_a007 Charge rate is limited until cell temperatures increase... BMS_a016 The module IDs do not match the pack type set by the config ... BMS_a017 BMS_a018
Alle BMS-Codes anzeigen →