BMS-A146
BMS_a146_SW_Brick_Overdischarged
Was bedeutet BMS-A146?
Tesla Alarm-Code im Batteriemanagementsystem-Modul (BMS). One or more bricks in the HV battery are at too low of a voltage to permit charging BMS detected and recovered from bus off on VEH, HVS or HVI CAN bus The BMS uses this for generic assertions about unexpected conditions An Soc by Ah saturation of >3% occurred while SOC saturation was active All bricks have <1% SOC by Ah saturation BMS is likely overestimating SOC of some bricks due to incorrect CAC or Coulomb counting BMS has detected that one or more bricks' voltage is below the warning threshold
Originale Beschreibung
One or more bricks in the HV battery are at too low of a voltage to permit charging BMS detected and recovered from bus off on VEH, HVS or HVI CAN bus The BMS uses this for generic assertions about unexpected conditions An Soc by Ah saturation of >3% occurred while SOC saturation was active All bricks have <1% SOC by Ah saturation BMS is likely overestimating SOC of some bricks due to incorrect CAC or Coulomb counting BMS has detected that one or more bricks' voltage is below the warning threshold
Schweregrad-Hinweise
BMS-A146 ist ein Alarm im Battery Management System-System. Es ist im Allgemeinen sicher, weiterzufahren, aber lassen Sie es beim nächsten geplanten Service überprüfen.