BMS-F107
BMS_f107_SW_Cell_Voltage_Sensor
Was bedeutet BMS-F107?
Tesla Fehler-Code im Batteriemanagementsystem-Modul (BMS). A high voltage (HV) battery cell voltage sensor error is detected. There are three reasons for this alert to be reported by the Battery Management System (BMS): BMS_a107_errorType = BMS_A107_MODULEBRICK_MISMATCHThis alerts means that the voltage of the module differs by more than 35mV from the sum of the brick voltages of that module.BMS_a107_errorType = BMS_A107_TVSH_BLEEDV_LOWThis alert type means that the bleed resistor is turned on for that brick, but the voltage is too low (likely due to a stuck bleed resistor).BMS_a107_errorType = BMS_A107_TVSH_IMP_HIGH This alert type is the most common. The system has detected a high impedance on the sensor harness from the Battery Monitoring Board (BMB) to the bricks / module. It means that the measurements from that BMB cannot be trusted.
Originale Beschreibung
A high voltage (HV) battery cell voltage sensor error is detected. There are three reasons for this alert to be reported by the Battery Management System (BMS): BMS_a107_errorType = BMS_A107_MODULEBRICK_MISMATCHThis alerts means that the voltage of the module differs by more than 35mV from the sum of the brick voltages of that module.BMS_a107_errorType = BMS_A107_TVSH_BLEEDV_LOWThis alert type means that the bleed resistor is turned on for that brick, but the voltage is too low (likely due to a stuck bleed resistor).BMS_a107_errorType = BMS_A107_TVSH_IMP_HIGH This alert type is the most common. The system has detected a high impedance on the sensor harness from the Battery Monitoring Board (BMB) to the bricks / module. It means that the measurements from that BMB cannot be trusted.
Schweregrad-Hinweise
BMS-F107 ist als Fehler (Fault) eingestuft und weist auf ein kritisches Problem im Battery Management System-System hin. Fahren Sie nicht weiter und kontaktieren Sie sofort den Tesla-Service.