TESLA Fehler

BMS-F123

BMS_f123_SW_Internal_Isolation

System
BMS
Battery Management System
Typ
Fehler
Kategorie
Batterie
Schweregrad
Fehler (Kritisch)

Was bedeutet BMS-F123?

Tesla Fehler-Code im Batteriemanagementsystem-Modul (BMS). This alert points to a high voltage (HV) battery internal isolation breakdown detected. This condition is concerning and should be should be addressed rapidly and thoroughly. Thresholds: BMS_a123 will trip if the isolation is below 500 Ohm/Volt or 192 Kohms at 385V and the contactors are open. The alert will clear if the isolation goes over 1000 ohm/volt and the contactors are open.

Originale Beschreibung

This alert points to a high voltage (HV) battery internal isolation breakdown detected. This condition is concerning and should be should be addressed rapidly and thoroughly. Thresholds: BMS_a123 will trip if the isolation is below 500 Ohm/Volt or 192 Kohms at 385V and the contactors are open. The alert will clear if the isolation goes over 1000 ohm/volt and the contactors are open.

Schweregrad-Hinweise

BMS-F123 ist als Fehler (Fault) eingestuft und weist auf ein kritisches Problem im Battery Management System-System hin. Fahren Sie nicht weiter und kontaktieren Sie sofort den Tesla-Service.

Weitere BMS-Codes

BMS_a001 BMS_a002 The Gateway packPerformanceDeviation config does not match t... BMS_a003 BMS was unable to read a pack birth date from the calibratio... BMS_a004 The pack hot seal test has not completed in the lifetime of ... BMS_a007 Charge rate is limited until cell temperatures increase... BMS_a016 The module IDs do not match the pack type set by the config ... BMS_a017 BMS_a018
Alle BMS-Codes anzeigen →