TESLA Diagnose

EPAS-D003

EPAS_d003_KFC_NVRAM_MNG_WRITE

System
EPAS
EPAS
Typ
Diagnose
Kategorie
Netzwerk
Schweregrad
Diagnose / Info

Was bedeutet EPAS-D003?

Tesla Diagnose-Code im EPAS-Modul (EPAS). A write to the Non-Volatile Random Access Memory (NVRAM) (DataFlash) has failed. Both the main and redundant blocks could not be written to the NVRAM. This may be caused by a defective NVRAM, incorrect Cyclic Redundancy Check (CRC), misconfigured NVRAM, or the drivers were not initialized. The reset conditions require a software restart, function inhibition reset, ignition change, and another function inhibition reset.

Originale Beschreibung

A write to the Non-Volatile Random Access Memory (NVRAM) (DataFlash) has failed. Both the main and redundant blocks could not be written to the NVRAM. This may be caused by a defective NVRAM, incorrect Cyclic Redundancy Check (CRC), misconfigured NVRAM, or the drivers were not initialized. The reset conditions require a software restart, function inhibition reset, ignition change, and another function inhibition reset.

Schweregrad-Hinweise

EPAS-D003 ist ein Diagnose- oder Informationscode im EPAS-System. Normalerweise ist keine sofortige Maßnahme erforderlich.

Weitere EPAS-Codes

EPAS_d001 The torque sensor has an internal malfunction.... EPAS_d002 A read job for the Non-Volatile Random Access Memory (NVRAM)... EPAS_d004 The Dataflash was not initialized.? The block was not writte... EPAS_d005 The Serial Peripheral Interface (SPI) configuration for the ... EPAS_d006 An error has been detected with the Phase-locked loop. The i... EPAS_d007 An internal failure has been detected with the output stage ... EPAS_d008 There is a Electric Power Assist Steering (EPAS) shutdown du... EPAS_d027 Motor Driver Runtime Error: Calculation for new Pulse Width ...
Alle EPAS-Codes anzeigen →