TESLA Warnung

HVP-W006

HVP_w006_OverChargeCurrentFault

System
HVP
High Voltage Protection
Typ
Warnung
Kategorie
Batterie
Schweregrad
Warnung

Was bedeutet HVP-W006?

Tesla Warnung-Code im Hochvoltschutz-Modul (HVP). Warns if the pack charge current is above max charge current limit The pack charge current is above max charge current limit for X duration (in msec) The pack charge current is below max charge current limit The DC charging will end and contactors may open immdediately or pyro may disconnect Warns if the CP ECU has faulted These charging will not be allowed Sets if an HVIL fault is detected. Contactors cannot close (car will no longer drive) if the contactors are currently open. If no repairs were performed and the alert clears on its own, there is risk of reoccurrence. The HVIL is broken or HVIL nodes are lower than expected Contactors will not close, it may open if vehicle not in drive Warn if pack contactor enter to the BLOCKED state Warns if the Energy reserve voltage supply is below minimum voltage threshold The Energy reserve voltage supply is below minimum voltage threshold The Energy reserve voltage supply is above minimum voltage threshold The pyro diagnostics may fail, the contactors will not close warn if harware triggers to blow the pyro This is an indication that pyro was blown The HVP config block may be missing, incorrect, or unsupported The HVP is unable to initialize configuration parameters

Originale Beschreibung

Warns if the pack charge current is above max charge current limit The pack charge current is above max charge current limit for X duration (in msec) The pack charge current is below max charge current limit The DC charging will end and contactors may open immdediately or pyro may disconnect Warns if the CP ECU has faulted These charging will not be allowed Sets if an HVIL fault is detected. Contactors cannot close (car will no longer drive) if the contactors are currently open. If no repairs were performed and the alert clears on its own, there is risk of reoccurrence. The HVIL is broken or HVIL nodes are lower than expected Contactors will not close, it may open if vehicle not in drive Warn if pack contactor enter to the BLOCKED state Warns if the Energy reserve voltage supply is below minimum voltage threshold The Energy reserve voltage supply is below minimum voltage threshold The Energy reserve voltage supply is above minimum voltage threshold The pyro diagnostics may fail, the contactors will not close warn if harware triggers to blow the pyro This is an indication that pyro was blown The HVP config block may be missing, incorrect, or unsupported The HVP is unable to initialize configuration parameters

Schweregrad-Hinweise

HVP-W006 ist eine Warnung im High Voltage Protection-System. Planen Sie zeitnah einen Servicetermin. Überwachen Sie Ihr Fahrzeug auf zusätzliche Warnungen.

Weitere HVP-Codes

HVP_a007 The high voltage (HV) system has reported an over-current co... HVP_w001 HVP_w002 HVP_w003 HVP_w005 HVP_w007 HVP_w008 HVP_w009
Alle HVP-Codes anzeigen →