TESLA Alarm

VCFRONT-A463

VCFRONT_a463_frunkSensorService

System
VCFRONT
Vehicle Controller Front
Typ
Alarm
Kategorie
Netzwerk
Schweregrad
Alarm

Was bedeutet VCFRONT-A463?

Tesla Alarm-Code im Fahrzeugsteuerung vorne-Modul (VCFRONT). Frunk sensor requires servicing Both switches are pressed, both switches are unpressed, or any switch is shorted/disconnected Frunk latch switches are in expected range Frunk behavior may be less optimized An issue with the low voltage (LV) electrical system requires the vehicle to come to a stop immediately. The vehicle should enter graceful power-off (GPO) to exit drive, and a separate alert should indicate that condition. Low voltage (LV) battery voltage below 10.8V for 3 seconds (3s). Low voltage (LV) battery voltage above 10.8V. The vehicle will not enter drive. If the vehicle is driving, it will exit drive through graceful power-off (GPO) to come to a stop immediately. A separate alert should be present to indicate the GPO Data gathering alert for turn stalk usage

Originale Beschreibung

Frunk sensor requires servicing Both switches are pressed, both switches are unpressed, or any switch is shorted/disconnected Frunk latch switches are in expected range Frunk behavior may be less optimized An issue with the low voltage (LV) electrical system requires the vehicle to come to a stop immediately. The vehicle should enter graceful power-off (GPO) to exit drive, and a separate alert should indicate that condition. Low voltage (LV) battery voltage below 10.8V for 3 seconds (3s). Low voltage (LV) battery voltage above 10.8V. The vehicle will not enter drive. If the vehicle is driving, it will exit drive through graceful power-off (GPO) to come to a stop immediately. A separate alert should be present to indicate the GPO Data gathering alert for turn stalk usage

Schweregrad-Hinweise

VCFRONT-A463 ist ein Alarm im Vehicle Controller Front-System. Es ist im Allgemeinen sicher, weiterzufahren, aber lassen Sie es beim nächsten geplanten Service überprüfen.

Weitere VCFRONT-Codes

Alle VCFRONT-Codes anzeigen →