TESLA Fault

BMS-F030

BMS_f030_SW_Chg_Port_Door_Open

System
BMS
Battery Management System
Type
Fault
Category
Battery
Severity
Fault (Critical)

What does BMS-F030 mean?

Tesla fault code in the Battery Management System (BMS) module. The battery management system (BMS) has detected that the charge port door is open or the fast charge (FC) contactors are welded. If this alert is present, the high voltage (HV) contactors will be prevented from closing. This means the HV system will not be exposed to the current if the FC contactors are welded or the charge port door is open.

Original Description

The battery management system (BMS) has detected that the charge port door is open or the fast charge (FC) contactors are welded. If this alert is present, the high voltage (HV) contactors will be prevented from closing. This means the HV system will not be exposed to the current if the FC contactors are welded or the charge port door is open.

Severity Notes

BMS-F030 is classified as a Fault, indicating a critical issue in the Battery Management System system. Do not continue driving and contact Tesla Service immediately.

Other BMS Codes

BMS_a001 BMS_a002 The Gateway packPerformanceDeviation config does not match t... BMS_a003 BMS was unable to read a pack birth date from the calibratio... BMS_a004 The pack hot seal test has not completed in the lifetime of ... BMS_a007 Charge rate is limited until cell temperatures increase... BMS_a016 The module IDs do not match the pack type set by the config ... BMS_a017 BMS_a018
View all BMS codes →