DI-F083
DI_f083_brakePedalSensor
What does DI-F083 mean?
Tesla fault code in the Drive Inverter (DI) module. A brake pedal sensor problem detected. This alert has been setting due to either the brake pedal switch not being installed properly or malfunctioning switches. The switch is a two part switch where one portion of the switch sends brake signals to the Gateway, electronic stability program (ESP) module, and the rear drive unit, while the other brake signal is sent directly to the rear drive unit for regeneration purposes. When the brake signal at the rear drive unit is not the same as the signal at the ESP module, this alert is triggered.
Original Description
A brake pedal sensor problem detected. This alert has been setting due to either the brake pedal switch not being installed properly or malfunctioning switches. The switch is a two part switch where one portion of the switch sends brake signals to the Gateway, electronic stability program (ESP) module, and the rear drive unit, while the other brake signal is sent directly to the rear drive unit for regeneration purposes. When the brake signal at the rear drive unit is not the same as the signal at the ESP module, this alert is triggered.
Severity Notes
DI-F083 is classified as a Fault, indicating a critical issue in the Drive Inverter system. Do not continue driving and contact Tesla Service immediately.