TAS-A225
TAS_a225_galleryPressureTooHigh
What does TAS-A225 mean?
Tesla alert code in the Thermal Architecture System (TAS) module. Gallery pressure was measured to be higher than expected under any operating condition. Front axle has been measured to be lower than any reasonable height. Front axle has been measured to be lower than any reasonable height for an extended period. Front axle has been measured to be not be lower than any reasonable height for an extended period. Debug information for 100ms task errors. Set along with TaskSchedulerError. Front right air valve detected short circuit. Front right air valve output shorted to ground or battery voltage. One or more CAN messages from GTW are not being received by the ECU. One or more CAN messages from GTW are not being received by the ECU (missing, bad RX rate, or invalid checksum/counter). Successful reception of all RXd CAN messages from GTW. Air suspension functionality may be reduced. Air suspension may not be able to recover from corrected faults. Debug information for 1000ms task errors. Set along with TaskSchedulerError. Rear right air valve detected open circuit. Rear right air valve commanded on but no electrical current measured. Front left air valve has reached its duty cycle (on time) limit. Front left air valve has dropped below its duty cycle (on time) limit, plus some hysteresis. Air suspension leveling will be temporarily disabled until front left air valve duty cycle drops.
Original Description
Gallery pressure was measured to be higher than expected under any operating condition. Front axle has been measured to be lower than any reasonable height. Front axle has been measured to be lower than any reasonable height for an extended period. Front axle has been measured to be not be lower than any reasonable height for an extended period. Debug information for 100ms task errors. Set along with TaskSchedulerError. Front right air valve detected short circuit. Front right air valve output shorted to ground or battery voltage. One or more CAN messages from GTW are not being received by the ECU. One or more CAN messages from GTW are not being received by the ECU (missing, bad RX rate, or invalid checksum/counter). Successful reception of all RXd CAN messages from GTW. Air suspension functionality may be reduced. Air suspension may not be able to recover from corrected faults. Debug information for 1000ms task errors. Set along with TaskSchedulerError. Rear right air valve detected open circuit. Rear right air valve commanded on but no electrical current measured. Front left air valve has reached its duty cycle (on time) limit. Front left air valve has dropped below its duty cycle (on time) limit, plus some hysteresis. Air suspension leveling will be temporarily disabled until front left air valve duty cycle drops.
Severity Notes
TAS-A225 is an Alert in the Thermal Architecture System system. It is generally safe to continue driving, but have it checked at your next scheduled service.